Call Features
285
Parameter
account.X.anonymous_call
[1]
<MAC>.cfg
Description It triggers the anonymous call feature to on or off.
Permitted
Values
0-Off
1-On, the IP phone will block its identity from showing to the callee when placing a call. The callee’s
phone screen presents “Anonymous” instead of the caller’s identity.
Default 0
Web UI Account->Basic->Anonymous (“account.X.anonymous_call.server_base_only” must not be left blank)
Phone UI
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Menu->Features->Anonymous->Line X->Anonymous (“account.X.anonymous_call.server_base_only”
must not be left blank)
T42G/T42S/T41P/T41S/T40P/T40G/T27G/T23P/T23G/T21(P) E2/T19(P) E2/CP920:
Menu->Features->Anonymous Call->Anonymous (“account.X.anonymous_call.server_base_only” must
not be left blank)
Parameter
account.X.send_anonymous_code
[1]
<MAC>.cfg
Description
It configures the IP phone to send anonymous on/off code to activate/deactivate the server-side anonym-
ous call feature for a specific account.
Permitted
Values
0-Off Code, the IP phone will send anonymous off code to the server when you deactivate the anonym-
ous call feature.
1-On Code, the IP phone will send anonymous on code to the server when you activate the anonymous
call feature.
Default 0
Web UI Account->Basic->Send Anonymous Code
Phone UI
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Menu->Features->Anonymous->LineX->Send Anony Code
T42G/T42S/T41P/T41S/T40P/T40G/T27G/T23P/T23G/T21(P) E2/T19(P) E2/CP920:
Menu->Features->Anonymous Call->Send Anonymous Code
Parameter
account.X.anonymous_call.server_base_only
[1]
<MAC>.cfg
Description
It enables or disables the IP phone to perform the anonymous call feature on server-side only.
Note: You need to configure parameters “account.X.anonymous_call_oncode” and “accoun-
t.X.anonymous_call_offcode” to activate or deactivate the server-side anonymous call feature.
Permitted
Values
0-Disabled, the IP phone will perform the anonymous call feature on server-side and locally. If the
anonymous call feature is enabled on the IP phone, the IP phone will carry the Anonymous attribute in
the From header of the INVITE message.
1-Enabled, the IP phone will perform the anonymous call feature on server-side only. The IP phone will
not carry the Anonymous attribute in the From header of the INVITE message even if the anonymous call
feature is enabled on the IP phone.
Default Blank
Parameter
account.X.anonymous_call_oncode
[1]
<MAC>.cfg
Description It configures the anonymous call on code.
To Next Page
Loading...
