EasyManua.ls Logo

Yealink T21PE2 - Page 30

Yealink T21PE2
556 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Administrators Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
24
Description
It configures the IPv4 default gateway.
Example:
static.network.internet_port.gateway = 192.168.1.254
Note: It works only if static.network.ip_address_mode is set to 0 (IPv4) or 2 (IPv4 & IPv6), and "stat-
ic.network.internet_port.type" is set to 2 (Static IP Address).
Permitted
Values
IPv4 Address
Default Blank
Web UI Network->Basic->IPv4 Config->Static IP Address->Default Gateway
Phone UI
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Menu->Advanced (default password: admin)->Network->WAN Port->IPv4->Static IP->Default Gateway
T42G/T42S/T41P/T41S/T40P/T40G/T27G/T23P/T23G/T21(P) E2/T19(P) E2/CP920:
Menu->Settings->Advanced Settings (default password: admin)->Network->WAN Port->IPv4->Static
IPv4 Client->Default Gateway
Parameter
static.network.static_dns_enable
[1]
<y0000000000xx>.cfg
Description
It triggers the static DNS feature to on or off.
Note: It works only if static.network.internet_port.type” is set to 0 (DHCP).
Permitted
Values
0-Off, the IP phone will use the IPv4 DNS obtained from DHCP.
1-On, the IP phone will use manually configured static IPv4 DNS.
Default 0
Web UI Network->Basic->IPv4 Config->Static DNS
Phone UI
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Menu->Advanced (default password: admin) ->Network->WAN Port->IPv4->Type(DHCP)->Static DNS
T42G/T42S/T41P/T41S/T40P/T40G/T27G/T23P/T23G/T21(P) E2/T19(P) E2/CP920:
Menu->Settings->Advanced Settings (default password: admin) ->Network->WAN Port->IPv4->DHCP
IPv4 Client->Static DNS
Parameter
static.network.primary_dns
[1]
<y0000000000xx>.cfg
Description
It configures the primary IPv4 DNS server.
Example:
static.network.primary_dns = 202.101.103.55
Note: It works only if static.network.ip_address_mode is set to 0 (IPv4) or 2 (IPv4 & IPv6). In DHCP envir-
onment, you also need to make sure static.network.static_dns_enable" is set to 1 (On).
Permitted
Values
IPv4 Address
Default Blank
Web UI Network->Basic->IPv4 Config->Static IP Address->Primary DNS
Phone UI T54S/T52S/T48S/T48G/T46S/T46G/T29G:

Table of Contents

Related product manuals