Yealink T21PE2 - Page 314

Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
308
Parameter features.forward.emergency.enable <y0000000000xx>.cfg
Description
It enables or disables the IP phone to receive the call from authorized numbers when the call forward fea-
ture is activated.
Note: It works only if “features.fwd.allow” is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled, the call from authorized numbers will not be forwarded when the call forward feature is activ-
ated.
Default 0
Web UI Features->Forward&DND->Forward->Forward Emergency
Parameter features.forward.emergency.authorized_number <y0000000000xx>.cfg
Description
It configures the authorized numbers.
The call from the authorized numbers cannot be forwarded even if the call forward feature is activated.
Multiple numbers are separated by commas.
Note: It works only if “features.fwd.allow” and “features.forward.emergency.enable” are set to 1
(Enabled).
Permitted
Values
String within 511 characters
Default Blank
Web UI Features->Forward&DND->Forward->Forward Authorized Numbers
Parameter forward.international.enable <y0000000000xx>.cfg
Description
It enables or disables the IP phone to forward incoming calls to international numbers (the prefix is 00).
Note: For Yealink IP phones, it works only if “features.fwd.allow” is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default 1
Web UI Features->General Information->Fwd International
Phone UI
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Menu->Advanced (default password: admin)->FWD International->FWD International
T42G/T42S/T41P/T41S/T40P/T40G/T27G/T23P/T23G/T21(P) E2/T19(P) E2/CP920:
Menu->Settings->Advanced Settings (default password: admin) ->FWD International->FWD Inter-
national
Parameter forward.idle_access_always_fwd.enable <y0000000000xx>.cfg
Description
It enables or disables the IP phone to always enter the Always Forward setting screen when pressing the
Forward key on the Idle screen.
Permitted
Values
0-Disabled. When pressing the Forward key, the IP phone may activate/deactivate the call forward or
enter the Always Forward/Busy Forward/No Answer Forward setting screen.
1-Enabled
Default 0