Yealink T21PE2 - Page 354

Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
348
Permitted
Values
String
Default Blank
Web UI Settings->Tones->Dial Recall
Parameter voice.tone.info <y0000000000xx>.cfg
Description
It customizes the info tone. The phone will play the info tone with the special information, for example,
the number you are calling is not in service.
The value format is Freq/Duration. For more information on the value format, refer to the parameter
“voice.tone.dial”.
Note: It works only if “voice.tone.country” is set to Custom. If you want to disable this warning tone, set it
to 0.
Permitted
Values
String
Default Blank
Web UI Settings->Tones->Info
Parameter voice.tone.stutter <y0000000000xx>.cfg
Description
It customizes the tone when the IP phone receives a voice mail.
The value format is Freq/Duration. For more information on the value format, refer to the parameter
“voice.tone.dial”.
Note: It works only if “voice.tone.country” is set to Custom. If you want to disable this warning tone, set it
to 0.
Permitted
Values
String
Default Blank
Web UI Settings->Tones->Stutter
Parameter voice.tone.message <y0000000000xx>.cfg
Description
It customizes the tone when the IP phone receives a text message.
The value format is Freq/Duration. For more information on the value format, refer to the parameter
“voice.tone.dial”.
Note: It works only if “voice.tone.country” is set to Custom. If you want to disable this warning tone, set it
to 0. It is not applicable to CP920 IP phones.
Permitted
Values
String
Default Blank
Web UI Settings->Tones->Message
Parameter voice.tone.autoanswer <y0000000000xx>.cfg
Description
It customizes the warning tone for the auto answer.
The value format is Freq/Duration. For more information on the value format, refer to the parameter
“voice.tone.dial”.