EasyManua.ls Logo

Yealink T21PE2 - Page 392

Yealink T21PE2
556 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Administrators Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
386
Parameter static.trusted_certificates.url <y0000000000xx>.cfg
Description
It configures the access URL of the custom trusted certificate used to authenticate the connecting server.
Example:
static.trusted_certificates.url = http://192.168.1.20/tc.crt
Note: The certificate you want to upload must be in *.pem, *.crt, *.cer or *.der format.
Permitted
Values
URL within 511 characters
Default Blank
Web UI Security->Trusted Certificates->Load Trusted Certificates File
Parameter static.trusted_certificates.delete <y0000000000xx>.cfg
Description
It deletes all uploaded trusted certificates.
Example:
static.trusted_certificates.delete = http://localhost/all
Permitted
Values
http://localhost/all
Default Blank
Parameter static.server_certificates.url <y0000000000xx>.cfg
Description
It configures the access URL of the certificate the IP phone sends for authentication.
Example:
static.server_certificates.url = http://192.168.1.20/ca.pem
Note: The certificate you want to upload must be in *.pem or *.cer format.
Permitted
Values
URL within 511 characters
Default Blank
Web UI Security->Server Certificates->Load Server Certificates File
Parameter static.server_certificates.delete <y0000000000xx>.cfg
Description
It deletes all uploaded server certificates.
Example:
static.server_certificates.delete = http://localhost/all
Permitted
Values
http://localhost/all
Default Blank
Parameter static.phone_setting.reserve_certs_enable <y0000000000xx>.cfg
Description It enables or disables the IP phone to reserve custom certificates after it is reset to factory defaults.
Permitted
Values
0-Disabled
1-Enabled

Table of Contents

Related product manuals