Yealink T21PE2 - Page 423

Advanced Features
417
Note: It works only if "features.pickup.blf_visual_enable” is set to 1 (Enabled). It is not applicable to
CP920/T48G/T46G/T42G/T41P/T29G/T19(P) E2 IP phones.
Permitted
Values
any
Monitored phone number
ListX
[1]
Default any
Parameter features.pickup.blf_audio_enable <y0000000000xx>.cfg
Description
It enables or disables the IP phone to play an audio alert when the monitored user receives an incoming
call.
Note: It is not applicable to T19(P) E2/CP920 IP phones.
Permitted
Values
0-Disabled
1-Enabled
Default 0
Web UI Features->Pickup & Park->Audio Alert for BLF Pickup
Parameter features.pickup.blf_audio.list <y0000000000xx>.cfg
Description
It configures the monitored users who want to enable audio alert for BLF pickup feature. The IP phone
plays an audio alert when a monitored user receives an incoming call.
Multiple monitored users are separated by commas.
Example:
features.pickup.blf_audio.list = any or leave it blank
The IP phone plays an audio alert when any monitored user receives an incoming call.
features.pickup.blf_audio.list = 4604,4605
The IP phone plays an audio alert when monitored user 4604 or 4605 receives an incoming call.
features.pickup.blf_audio.list = List1
The IP phone plays an audio alert when any user in the List 1 receives an incoming call. ListX stands for
the BLF list of account X configured by the parameter "account.X.blf.blf_list_uri".
Note: It works only if "features.pickup.blf_audio_enable” is set to 1 (Enabled). It is not applicable to
CP920/T48G/T46G/T42G/T41P/T29G/T19(P) E2 IP phones.
Permitted
Values
any
Monitored phone number
ListX
[1]
Default any
Parameter features.blf.ring_type <y0000000000xx>.cfg
Description
It configures an alert tone to play when a monitored line rings.
Example:
features.blf.ring_type = Ring5.wav
Note: It works only if “features.pickup.blf_audio_enable” is set to 1 (Enabled). It is not applicable to T19(P)