Yealink T21PE2 - Page 458

Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
452
action_url.answer_new_incoming_call = http://192.168.0.20/help.xml?IP=$ip
Permitted
Values
URL within 511 characters
The value format is: http(s)://IP address of server/help.xml?variable name=variable value. For Pre-defined
events, refer to Pre-defined Events List. For variable value, refer to Variable Values List.
Default Blank
Web UI Features->Action URL->Answer New Incoming Call
Parameter action_url.transfer_finished <y0000000000xx>.cfg
Description
It configures the action URL the IP phone sends when completing a call transfer.
Example:
action_url.transfer_finished = http://192.168.0.20/help.xml?IP=$ip
Permitted
Values
URL within 511 characters
The value format is: http(s)://IP address of server/help.xml?variable name=variable value. For Pre-defined
events, refer to Pre-defined Events List. For variable value, refer to Variable Values List.
Default Blank
Web UI Features->Action URL->Transfer Finished
Parameter action_url.transfer_failed <y0000000000xx>.cfg
Description
It configures the action URL the IP phone sends when failing to transfer a call.
Example:
action_url.transfer_failed = http://192.168.0.20/help.xml?IP=$ip
Permitted
Values
URL within 511 characters
The value format is: http(s)://IP address of server/help.xml?variable name=variable value. For Pre-defined
events, refer to Pre-defined Events List. For variable value, refer to Variable Values List.
Default Blank
Web UI Features->Action URL->Transfer Failed
Parameter action_url.setup_autop_finish <y0000000000xx>.cfg
Description
It configures the action URL the IP phone sends when completing auto provisioning via power on.
Example:
action_url.setup_autop_finish = http://192.168.0.20/help.xml?IP=$ip
Permitted
Values
URL within 511 characters
The value format is: http(s)://IP address of server/help.xml?variable name=variable value. For Pre-defined
events, refer to Pre-defined Events List. For variable value, refer to Variable Values List.
Default Blank
Web UI Features->Action URL->Autop Finish
Parameter action_url.call_waiting_on <y0000000000xx>.cfg
Description
It configures the action URL the IP phone sends when call waiting feature is enabled.
Example: