Yealink T21PE2 - Page 46

Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
40
works only if “static.wifi.function.enable” is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default 0
Web UI Network->Wi-Fi->Wi-Fi Active
Phone UI
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Menu->Basic->Wi-Fi->Wi-Fi
T42S/T41S/T27G/CP920:
Menu->Settings->Basic Settings->Wi-Fi
Parameter
static.wifi.X.label
[2]
<y0000000000xx>.cfg
Description
It configures the profile name of the wireless network X for the IP phone.
Note: It works only if “static.wifi.enable” is set to 1 (Enabled). It is only applicable to
T54S/T52S/T48S/T48G/T46S/T46G/T42S/T41S/T29G/T27G/CP920 IP phones.
Permitted
Values
String within 32 characters
Default Blank
Web UI Network->Wi-Fi->Profile Name
Phone UI
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Menu->Basic->Wi-Fi->Wi-Fi (On)->Known Network (press Add)->Profile Name
or
Menu->Basic->Wi-Fi->Wi-Fi (On)->Known Network->Option->Edit->Profile Name
T42S/T41S/T27G/CP920:
Menu->Settings->Basic Settings->Wi-Fi (On)->Known Network (press Add)->Profile Name
or
Menu->Settings->Basic Settings->Wi-Fi->Wi-Fi (On)->Known Network->Option->Edit->Profile Name
Parameter
static.wifi.X.ssid
[2]
<y0000000000xx>.cfg
Description
It configures the Service Set Identifier (SSID) of the wireless network X.
SSID is a unique identifier for accessing wireless access points.
Note: It works only if “static.wifi.enable” is set to 1 (Enabled). It is only applicable to
T54S/T52S/T48S/T48G/T46S/T46G/T42S/T41S/T29G/T27G/CP920 IP phones.
Permitted
Values
String within 32 characters
Default Blank
Web UI Network->Wi-Fi->SSID
Phone UI
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Menu->Basic->Wi-Fi->Wi-Fi (On)->Known Network (press Add)->SSID
or