Yealink T21PE2 - Page 460

Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
454
Description
It configures the action URL the IP phone sends when canceling the outgoing call in the ring-back state.
Example:
action_url.cancel_callout= http://192.168.0.20/help.xml?IP=$ip
Permitted
Values
URL within 511 characters
The value format is: http(s)://IP address of server/help.xml?variable name=variable value. For Pre-defined
events, refer to Pre-defined Events List. For variable value, refer to Variable Values List.
Default Blank
Web UI Features->Action URL->Cancel Call Out
Parameter action_url.remote_busy <y0000000000xx>.cfg
Description
It configures the action URL the IP phone sends when the outgoing call is rejected.
Example:
action_url.remote_busy = http://192.168.0.20/help.xml?IP=$ip
Permitted
Values
URL within 511 characters
The value format is: http(s)://IP address of server/help.xml?variable name=variable value. For Pre-defined
events, refer to Pre-defined Events List. For variable value, refer to Variable Values List.
Default Blank
Web UI Features->Action URL->Remote Busy
Parameter action_url.call_remote_canceled <y0000000000xx>.cfg
Description
It configures the action URL the IP phone sends when the remote party cancels the outgoing call in the
ringing state.
Example:
action_url.call_remote_canceled= http://192.168.0.20/help.xml?IP=$ip
Permitted
Values
URL within 511 characters
The value format is: http(s)://IP address of server/help.xml?variable name=variable value. For Pre-defined
events, refer to Pre-defined Events List. For variable value, refer to Variable Values List.
Default Blank
Web UI Features->Action URL->Call Remote Canceled
Parameter action_url.peripheral_information <y0000000000xx>.cfg
Description
It configures the action URL the IP phone sends when you unplug or plug the accessory.
Example:
action_url.peripheral_information = http://192.168.0.20/help.xml?IP=$ip&WIFI=$wifi_number
Permitted
Values
URL within 511 characters
The value format is: http(s)://IP address of server/help.xml?variable name=variable value. For Pre-defined
events, refer to Pre-defined Events List. For variable value, refer to Variable Values List.
Default Blank
Web UI Features->Action URL->Peripheral Information