EasyManua.ls Logo

Yealink T21PE2 - Page 469

Yealink T21PE2
556 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Advanced Features
463
Permitted
Values
0-Disabled
1-Enabled
Default 0
Parameter
account.X.sub_fail_retry_interval
[1]
<MAC>.cfg
Description It configures the interval (in seconds) for the IP phone to retry to re-subscribe when subscription fails.
Permitted
Values
Integer from 0 to 3600
Default 30
Parameter
account.X.subscribe_mwi_to_vm
[1]
<MAC>.cfg
Description
It enables or disables the IP phone to subscribe the message waiting indicator to the voice mail number.
Note: It works only if account.X.subscribe_mwi is set to 1 (Enabled) and “voice_mail.number.X” is con-
figured.
Permitted
Values
0-Disabled, the IP phone will subscribe the message waiting indicator to a specific account.
1-Enabled
Default 0
Web UI Account->Advanced->Subscribe MWI To Voice Mail
Parameter
voice_mail.number.X
[1]
<MAC>.cfg
Description
It configures the voice mail number.
Example:
voice_mail.number.1 = 1234
Permitted
Values
String within 99 characters
Default Blank
Web UI Account->Advanced->Voice Mail
Phone UI Menu->Message->Voice Mail->Set Voice Mail Code
Parameter
account.X.display_mwi.enable
[1]
<MAC>.cfg
Description
It enables or disables the MWI alert to indicate that you have an unread voicemail message.
Note: It always works at the time of Unsolicited MWI; at the time of solicited MWI, MWI subscription fea-
ture should be configured in advance. To present audio MWI, you also need to set "features.voice_mail_
tone_enable" to 1 (Enabled) in advance.
Permitted
Values
0-Disabled,
1-Enabled, the View Voice Mail menu displays a message summary with counts. If features.voice_mail_
tone_enable”, features.voice_mail_popup.enable and “phone_setting.mail_power_led_flash_enable” are
set to 1 (Enabled), users receive a visual and audio alert when they have new voicemail messages available
on their phone.
Default 1
Web UI Account->Advanced->Voice Mail Display
Parameter features.voice_mail_alert.enable <y0000000000xx>.cfg
Description
It enables or disables the IP phone to pop up the message when receiving the same amount of new voice-

Table of Contents

Related product manuals