Phone Network
43
Description
It configures the EAP authentication mode of the wireless network X.
Note: It works only if “static.wifi.enable” is set to 1 (Enabled) and “static.wifi.X.security_mode” is set to
WPA-EAP or WPA2-EAP. It is only applicable to T54S/T52S/T48S/T48G/T46S/T46G/T42S/T41S/T29G/T27G
IP phones.
Permitted
Values
TTLS, PEAP or TLS
Default Blank
Parameter
static.wifi.X.eap_user_name
[2]
<y0000000000xx>.cfg
Description
It configures the EAP authentication username of the wireless network X.
Note: It works only if “static.wifi.enable” is set to 1 (Enabled), “static.wifi.X.security_mode” is set to WPA-
EAP or WPA2-EAP and “static.wifi.X.eap_type” is set to TTLS or PEAP. It is only applicable to
T54S/T52S/T48S/T48G/T46S/T46G/T42S/T41S/T29G/T27G/CP920 IP phones.
Permitted
Values
String within 32 characters
Default Blank
Web UI Network->Wi-Fi->User Name
Phone UI
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Menu->Basic->Wi-Fi->Wi-Fi (On)->Known Network (press Add) ->User Name
or
Menu->Basic->Wi-Fi->Wi-Fi (On)->Known Network->Option->Edit->User Name
T42S/T41S/T27G/CP920:
Menu->Settings->Basic Settings->Wi-Fi->Wi-Fi (On)->Known Network (press Add) ->User Name
or
Menu->Settings->Basic Settings->Wi-Fi->Wi-Fi (On)->Known Network->Option->Edit->User Name
Parameter
static.wifi.X.eap_password
[2]
<y0000000000xx>.cfg
Description
It configures the EAP authentication password of the wireless network X.
Note: It works only if “static.wifi.enable” is set to 1 (Enabled) and “static.wifi.X.security_mode” is set to
WPA-EAP or WPA2-EAP. It is only applicable to
T54S/T52S/T48S/T48G/T46S/T46G/T42S/T41S/T29G/T27G/CP920 IP phones.
Permitted
Values
String within 64 characters
Default Blank
Web UI Network->Wi-Fi->PSK
Phone UI
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Menu->Basic->Wi-Fi->Wi-Fi (On)->Known Network (press Add) ->WPA Shared Key or
Menu->Basic->Wi-Fi->Wi-Fi (On)->Known Network->Option->Edit->WPA Shared Key
T42S/T41S/T27G/CP920:
Menu->Settings->Basic Settings->Wi-Fi->Wi-Fi (On)->Known Network (press Add) ->WPA Shared Key