Yealink T21PE2 - Page 525

Troubleshooting Methods
519
static.syslog.port = 515
Permitted
Values
Integer from 1 to 65535
Default 514
Web UI Settings->Configuration->Syslog->Syslog Server->Port
Parameter static.syslog.transport_type <y0000000000xx>.cfg
Description
It configures the transport protocol that the IP phone uses when uploading log messages to the syslog
server.
Permitted
Values
0-UDP
1-TCP
2-TLS
Default 0
Web UI Settings->Configuration->Syslog->Syslog Transport Type
Parameter static.syslog.level <y0000000000xx>.cfg
Description
It configures the lowest level of syslog information that displays in the syslog.
When you choose a log level, it includes all events of an equal or higher severity level and excludes
events of a lower severity level. The logging level you choose determines the lowest severity of events to
log.
Permitted
Values
0-Emergency: system is unusable
1-Alert: action must be taken immediately
2-Critical: critical conditions
3-Critical: error conditions
4-Warning: warning conditions
5-Warning: normal but significant condition
6-Informational: informational messages
Default 3
Web UI Settings->Configuration->Syslog->Syslog Level
Parameter static.syslog.facility <y0000000000xx>.cfg
Description
It configures the facility that generates the log messages.
Note: For more information, refer to RFC 3164.
Permitted
Values
0-Kernel Messages
1-User-level Messages
2-Mail System
3-System Daemons
4-Security/Authorization Messages (Note 1)
5-Messages are generated internally by syslog