EasyManua.ls Logo

Yealink T21PE2 - Page 62

Yealink T21PE2
556 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Administrators Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
56
Default Blank
Web UI Network->Advanced->802.1x->Identity
Phone UI
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Menu->Advanced (default password: admin) ->Network->802.1x->Identity
T42G/T42S/T41P/T41S/T40P/T40G/T27G/T23P/T23G/T21(P) E2/T19(P) E2/CP920:
Menu->Settings->Advanced Settings (default password: admin) ->Network->802.1x->Identity
Parameter
static.network.802_1x.md5_password
[1]
<y0000000000xx>.cfg
Description
It configures the password for 802.1x authentication.
Example:
static.network.802_1x.md5_password = admin123
Note: It works only if static.network.802_1x.mode is set to 1, 3, 4, 5, 6 or 7.
Permitted
Values
String within 32 characters
Default Blank
Web UI Network->Advanced->802.1x->MD5 Password
Phone UI
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Menu->Advanced (default password: admin) ->Network->802.1x->MD5 Password
T42G/T42S/T41P/T41S/T40P/T40G/T27G/T23P/T23G/T21(P) E2/T19(P) E2/CP920:
Menu->Settings->Advanced Settings (default password: admin) ->Network->802.1x->MD5 Password
Parameter static.network.802_1x.root_cert_url <y0000000000xx>.cfg
Description
It configures the access URL of the CA certificate.
Example:
static.network.802_1x.root_cert_url = http://192.168.1.10/ca.pem
Note: It works only if static.network.802_1x.mode is set to 2, 3, 4, 5, 6 or 7. If the authentication method
is EAP-FAST, you also need to set static.network.802_1x.eap_fast_provision_mode to 1 (Authenticated
Provisioning). The format of the certificate must be *.pem, *.crt, *.cer or *.der.
Permitted
Values
URL within 511 characters
Default Blank
Web UI Network->Advanced->802.1x->CA Certificates
Parameter static.network.802_1x.client_cert_url <y0000000000xx>.cfg
Description
It configures the access URL of the device certificate.
Example:
static.network.802_1x.client_cert_url = http://192.168.1.10/client.pem
Note: It works only if static.network.802_1x.mode is set to 2 (EAP-TLS). The format of the certificate
must be *.pem.
Permitted
URL within 511 characters

Table of Contents

Related product manuals