Chapter 3 PERFORMING MEASUREMENTS
3-67
Shifting the Trace
The currently displayed trace can be shifted as explained below.
1. Press [SCALE] to highlight the display start level (dB)/display start distance
(km).
The following items will be highlighted alternately each time [SCALE] is pressed.
Display start level (dB)/display start distance (km)
Vertical-axis scale (dB/Div)/horizontal-axis scale (km/Div)
2. Use the arrow keys to shift the trace.
Press [S]: Shifts the trace downward.
Press [T]: Shifts the trace upward.
Press [W]: Shifts the trace to the left.
Press [X]: Shifts the trace to the right.
This trace shift function is effective only if the trace is currently enlarged.
The trace is shifted by turned rotary knob to same direction continuously after
cursor is moved to the left end or the right end when the trace is enlarge.
Caution
TIP
To Next Page
Loading...
