Chapter 5 EDITING AUTOMATIC SEARCH RESULTS
5-30
Changing the Back Scatter Level
For details on back scatter level, refer to page 3-40.
1.
Locate the cursor to “BACKSCATTER” by using the rotary knob or the arrow
key.
2. Press [ENTER].
A selection window will appear.
3. Change to the desired back scatter level.
For the method of changing the back scatter level, refer to page 3-40.
4.
Press [F1] (Re-SEARCH START).
Auto search will start with the newly set search conditions.
When changing the condition for two or more items, it is recommended to change
the condition for each item first and then press [F1].
Refer to the notes given on changing the search conditions (page 5-38).
Refer
Refer
TIP
Refer
To Next Page
Loading...
