Chapter 6 FILE OPERATION
6-10
Selecting the File to be Deleted
8. Locate the cursor to the file to be deleted by turning the rotary knob.
9. Press [F2] (FILE SELECT) to select the file.
•The color of the selected file name will change. “*” also appears in front of the file
name. (Refer to page 6-6.)
•If a file(s) that you do not want to delete is selected by mistake, repeat steps 8 and
9. This will cancel selection of that file(s).
•When you want to delete all the files displayed in the list, they can be selected by
pressing [F3] (ALL FILE SELECT) at step 8.
•By pressing [SCALE], the file list display format can be changed. However, if “FILE
NAME + LABEL” is selected, it will take some time before the file list is displayed.
(Refer to page 6-6.)
TIP
To Next Page
Loading...
Need help?
General
