Chapter 7 USING USEFUL FUNCTIONS
7-34
4. Press [ENTER].
A new window will appear.
For details on the window, refer to page 3-106.
5.
Press [F3] (LIST EDIT).
A new window will appear.
For details on the window, refer to page 5-17.
6.
Press [F2] (EVENT FIX).
A selection window will appear.
*: Indicates the default setting.
7. Locate the cursor to “ON” by using the rotary knob or [S] / [T].
8. Press [ENTER].
The currently displayed event will be set as the master event.
9. Measure a new optical fiber and perform auto search. The information at the
position at the same distance as the master event will be displayed.
Refer
Refer
TIP
*OFF
Selectable event
fix settings
ON
To Next Page
Loading...
