Chapter 7 USING USEFUL FUNCTIONS
7-35
• The event fix function will be turned OFF (disabled) if measurement conditions
(wavelength, distance range, pulse width, data size) are changed. It will also be
turned OFF if the horizontal-axis scale is increased/decreased during real-time
measurement.
•If an event other than the master event is found when another optical fiber is
measured and an event search is executed, the event is also displayed.
• If end point shorter than end point of master event is found when another optical
fiber measured and event search is executed, bellow message is displayed. And
comment as “EVENT SEARCH detect as END point” is displayed in Event note.
Caution
Irregular end point alert.
Push any key.
To Next Page
Loading...
Need help?
General
