YOKOGAWA GS200 User Manual

13.2 Commands
13-17
IM GS210-01EN
Communication Commands
3
2
1
4
5
6
7
8
9
10
11
12
13
14
15
App
Index
:INITiate
Function Clears the measured value and prepares the
GS200 to perform the next measurement.
Syntax
:INITiate
Example
:INIT
:FETCh?
Function Queries the measured result.
Syntax
:FETCh?
→ <real number> The measured result.
Example
:FETC?
:READ?
Function Clears the measured value, prepares the GS200
to perform the next measurement, and queries
the measured result.
Syntax
:READ?
→ <real number> The measured result.
Example
:READ?
Description T
his command is the same as
:INIT;:FETC?
. If
this command is received when the GS200 is not
performing measurements, no result is returned.
:MEASure?
Function Clears the measured value, prepares the GS200
to perform the next measurement, generates a
measurement trigger, and queries the measured
result.
Syntax
:MEASure?
→ <real number> The measured result.
Example
:MEAS?
Description This command is the same as
:INIT;*TRG;:
FETC?
.
13.2.6 Measured Value Read Commands (INITiate, FETCh, READ, and MEASure
groups)
The commands in this group are only valid on models with the /MON option.

YOKOGAWA GS200 Specifications

General

Brand	YOKOGAWA
Model	GS200
Category	Power Supply
Language	English