Using the control panel 115
• Downloading finishes.
4. The panel shows a list of erroneous parameters.
Scroll the parameters with keys and
. The reason for parameter error is also
shown.
• To edit parameters, press when EDIT
command is visible. See section Using the
Parameters option on page 97.
• To save the new value, press .
• To return to the list of erroneous parameters,
press .
5. The parameter value you chose is visible under
the parameter name.
Press when you have edited parameters.
Step Action Display
Finishing restore
operation
PAR BACKUPLOC
1313 AI SUPERVIS ACT
0000 bin
INCORRECT VALUE TYPE
READY EDIT
PAR ERRORS
LOC
4
00:00
To Next Page
Loading...
