ABB ACL30 - Time & Date Option; Using the Time and Date Option

Using the control panel 109
Time & Date option
In the Time & Date option, you can:
• show or hide the clock
• change date and time display formats
• set the date and time
• enable or disable automatic clock transitions according to the daylight saving
changes
• start, stop, change the direction and switch between local and remote control.
The control panel contains a battery to make sure the function of the clock when the
panel is not powered by the drive.
 Using the Time and Date option
Step Action Display
1. Go to the Main menu by pressing if you are
in the Output mode, otherwise by pressing
repeatedly until you get to the Main menu.
2. Go to the Time & Date option by selecting TIME &
DATE on the menu with keys and ,
and pressing .
3. • To show (hide) the clock, select CLOCK
VISIBILITY on the menu, press , select
Show clock (Hide clock) with keys and
and press , or, if you want to
return to the previous display without making
changes, press .
• To specify the time format, select TIME
FORMAT on the menu, press and select
a suitable format with keys and .
Press to save or to cancel your
changes.
MENU
EXIT
PARAMETERS
FAULT LOGGER
TIME & DATE
EXIT ENTER00:00
MAIN MENU 3
LOC
ENTER
CLOCK VISIBILITY
TIME FORMAT
DATE FORMAT
SET TIME
SET DATE
EXIT
SEL00:00
TIME & DATE 1
LOC
SEL
SEL
EXIT
Show clock
Hide clock
EXIT
SEL00:00
CLOCK VISIB 1LOC
SEL
SEL
CANCEL
24-hour
12-hour
CANCEL
SEL
00:00
TIME FORMAT 1
LOC