ABB ACL30 - Page 207

Parameters 207
08.03 FAULT TIME HI
Shows the time (real time or power-on time) at which
the active fault occurred in format dd.mm.yy
(=day.month.year).
-/ INT32
0...2147483647
days
Number of days. - / 1 = 1
08.04 FAULT TIME LO
Shows the time (real time or power-on time) at which
the active fault occurred in format hh.mm.ss
(hours.minutes.seconds).
-/ INT32
00.00.00...
2147483647
Time (in hours.minutes.seconds) - / 1 = 1
08.05 ALARM LOGGER 1
Alarm logger 1. For possible causes and remedies,
see chapter Fault tracing.
-/ Pb
0x0000...0xFFFF Alarm logger 1 1 = 1 / -
No. Bit/Name/Value/
Range
Description Def/Type
FbEq
(16b/32b)
Bit Alarm
0 BRAKE START TORQ
1 BRAKE NOT CLOSED
2 BRAKE NOT OPEN
3 SAFE TORQUE OFF
4STO MODE CHANGE
5MOTOR TEMP
6 EMERGENCY OFF
7 RUN ENABLE
8 MOTOR ID-RUN
9 EMERGENCY STOP
10 RESERVED
11 BR OVERHEAT
12 BC OVERHEAT
13 DEVICE OVERTEMP
14 INTBOARD OVERTEM
15 BC MOD OVERTEMP