ABB ACL30 - Page 210

210 Parameters
08.11 ALARM WORD 1
Alarm word 1. For possible causes and remedies, see
chapter Fault tracing.
-/ UINT32
0x0000...0xFFFF Alarm word 1 1 = 1 / -
08.12 ALARM WORD 2
Alarm word 2. For possible causes and remedies, see
chapter Fault tracing.
-/ UINT32
0x0000...0xFFFF Alarm word 2 1 = 1 / -
No. Bit/Name/Value/
Range
Description Def/Type
FbEq
(16b/32b)
Bit Alarm
0 BRAKE START TORQ
1 BRAKE NOT CLOSED
2 BRAKE NOT OPEN
3 SAFE TORQUE OFF
4STO MODE CHANGE
5MOTOR TEMP
6 EMERGENCY OFF
7 RUN ENABLE
8 MOTOR ID-RUN
9 EMERGENCY STOP
10 RESERVED
11 BR OVERHEAT
12 BC OVERHEAT
13 DEVICE OVERTEMP
14 INTBOARD OVERTEM
15 BC MOD OVERTEMP
Bit Alarm
0 IGBT OVERTEMP
1 FIELDBUS COMM
2 RESERVED
3 AI SUPERVISION
4 RESERVED
5 NO MOTOR DATA
6 ENCODER FAIL
7...9 RESERVED
10 ENC EMUL FAILURE
11 FEN TEMP FAILURE
12 ENC MAX FREQ
13 ENC REF ERROR
14 RESOLVER ERROR
15 ENCODER CABLE