ABB ACL30 - Page 271

Parameters 271
FEN-11 SWref Module type: FEN-11 Absolute Encoder Interface.
Emulation: Drive software position (source selected
by par. 93.08 EMUL POS REF) is emulated to FEN-
11 TTL output.
4
FEN-11 ABS Module type: FEN-11 Absolute Encoder Interface.
Emulation: FEN-11 absolute encoder input (X42)
position is emulated to FEN-11 TTL output.
5
FEN-11 TTL Module type: FEN-11 Absolute Encoder Interface.
Emulation: FEN-11 TTL encoder input (X41) position
is emulated to FEN-11 TTL output.
6
FEN-21 SWref Module type: FEN-21 Resolver Interface. Emulation:
Drive software position (source selected by par.
93.08 EMUL POS REF) is emulated to FEN-21 TTL
output.
7
FEN-21 RES Module type: FEN-21 Resolver Interface. Emulation:
FEN-21 resolver input (X52) position is emulated to
FEN-21 TTL output.
8
FEN-21 TTL Module type: FEN-21 Resolver Interface. Emulation:
FEN-21 TTL encoder input (X51) position is
emulated to FEN-21 TTL output.
9
FEN-31 SWref Module type: FEN-31 HTL Encoder Interface.
Emulation: Drive software position (source selected
by par. 93.08 EMUL POS REF) is emulated to FEN-
31 TTL output.
10
FEN-31 HTL Module type: FEN-31 HTL Encoder Interface.
Emulation: FEN-31 HTL encoder input (X82) position
is emulated to FEN-31 TTL output.
11
90.03 TTL ECHO SEL
Enables and selects the interface for the TTL
encoder signal echo.
Note: If encoder emulation and echo are enabled for
the same FEN-xx TTL output, the emulation
overrides the echo.
Disabled /
enum
Disabled TTL echo disabled. 0
FEN-01 TTL+ Module type: FEN-01 TTL Encoder Interface.
Echo: TTL encoder input (X32) pulses are echoed to
the TTL output.
1
FEN-01 TTL Module type: FEN-01 TTL Encoder Interface.
Echo: TTL encoder input (X31) pulses are echoed to
the TTL output.
2
FEN-11 TTL Module type: FEN-11 Absolute Encoder Interface.
Echo: TTL encoder input (X41) pulses are echoed to
the TTL output.
3
No. Bit/Name/Value/
Range
Description Def/Type
FbEq
(16b/32b)