Info. no. Message Supported
6 Output signal 06 Yes
7 Output signal 07 Yes
8 Output signal 08 Yes
Status
Terminal status indications in monitor direction, I103IED
Indication block for status in monitor direction with defined IED functions.
Number of instances: 1
Function type is selected with parameter FunctionType.
Information number is defined for each input signals.
Info. no. Message Supported
19 LED reset Yes
20 Monitor direction blocked No
21 TestMode
22 Local Parameter setting
23 Setting group 1 active Yes
24 Setting group 2 active Yes
25 Setting group 3 active Yes
26 Setting group 4 active Yes
Function status indications in monitor direction, user-defined, I103UserDef
Function indication blocks in monitor direction with user-defined input signals.
Number of instances: 20
Function type is selected with parameter FunctionType for each function block
instance in private range. Default values are defined in private range 5 - 24. One for
each instance.
Information number is required for each input signal. Default values are defined in
range 1 - 8.
Supervision indications in monitor direction, I103Superv
Indication block for supervision in monitor direction with defined functions.
Number of instances: 1
Function type is selected with parameter FunctionType.
1MRK505222-UUS C Section 17
Station communication
1039
Technical reference manual
To Next Page
Loading...
