Information number is defined for output signals.
Ground fault indications in monitor direction, I103EF
Indication block for ground fault in monitor direction with defined functions.
Number of instances: 1
Function type is selected with parameter FunctionType.
Information number is defined for each output signal.
Info. no. Message Supported
48 Ground fault A No
49 Ground fault B No
50 Ground fault C No
51 Ground fault forward Yes
52 Ground fault reverse Yes
Fault indications in monitor direction, type 1, I103FltDis
Fault indication block for faults in monitor direction with defined functions.
The instance type is suitable for distance protection function.
FUNCTION TYPE parameter for each block.
INFORMATION NUMBER is defined for each input signal.
Number of instances: 1
Info. no.
Message Supported
64 Start L1 Yes
65 Start L2 Yes
66 Start L3 Yes
67 Start IN Yes
84 General start Yes
69 Trip L1 Yes
70 Trip L2 Yes
71 Trip L3 Yes
68 General trip Yes
74 Fault forward/line Yes
75 Fault reverse/busbar Yes
78 Zone 1 Yes
Table continues on next page
Section 17 1MRK505222-UUS C
Station communication
1040
Technical reference manual
To Next Page
Loading...
