ABB Relion 670 series - Page 925

Name Values (Range) Unit Step Default Description
VB_Max 0.000 -
10000000000.000
V 0.001 300000.000 Maximum value
VB_RepTyp Cyclic
Dead band
Int deadband
- - Cyclic Reporting type
VB_LimHys 0.000 - 100.000 % 0.001 5.000 Hysteresis value in % of range and is
common for all limits
VB_AnDbRepInt 1 - 300 Type 1 10 Cycl: Report interval (s), Db: In % of range,
Int Db: In %s
VC_DbRepInt 1 - 300 Type 1 10 Cycl: Report interval (s), Db: In % of range,
Int Db: In %s
VC_Max 0.000 -
10000000000.000
V 0.001 300000.000 Maximum value
VC_RepTyp Cyclic
Dead band
Int deadband
- - Cyclic Reporting type
VC_LimHys 0.000 - 100.000 % 0.001 5.000 Hysteresis value in % of range and is
common for all limits
VC_AnDbRepInt 1 - 300 Type 1 10 Cycl: Report interval (s), Db: In % of range,
Int Db: In %s
Table 557: VNMMXU Non group settings (advanced)
Name
Values (Range) Unit Step Default Description
VA_ZeroDb 0 - 100000 m% 1 0 Zero point clamping in 0.001% of range
VA_HiHiLim 0.000 -
10000000000.000
V 0.001 260000.000 High High limit (physical value)
VA_HiLim 0.000 -
10000000000.000
V 0.001 240000.000 High limit (physical value)
VA_LowLim 0.000 -
10000000000.000
V 0.001 220000.000 Low limit (physical value)
VA_LowLowLim 0.000 -
10000000000.000
V 0.001 200000.000 Low Low limit (physical value)
VMagComp100 -10.000 - 10.000 % 0.001 0.000 Magnitude factor to calibrate voltage at 100%
of Vn
VA_Min 0.000 -
10000000000.000
V 0.001 0.000 Minimum value
VB_ZeroDb 0 - 100000 m% 1 0 Zero point clamping in 0.001% of range
VB_HiHiLim 0.000 -
10000000000.000
V 0.001 260000.000 High High limit (physical value)
VB_HiLim 0.000 -
10000000000.000
V 0.001 240000.000 High limit (physical value)
VB_LowLim 0.000 -
10000000000.000
V 0.001 220000.000 Low limit (physical value)
Table continues on next page
1MRK505222-UUS C Section 15
Monitoring
919
Technical reference manual