Ordering and Running a STAT Sample
AEROSET
®
Customer Training Guide 4-19
94858-103 — July 2003
5. Select the assays or panels to be run.
NOTE: Assays with button text that is green in color meet
all required conditions. If the button text is pink or yellow,
further investigation is necessary before performing the
assay.
For more information, refer to Confirmation of Assay
Parameter Settings in Section 2, Installation Procedures
and Special Requirements of the AEROSET System
Operations Manual.
6. Select <Start> in the upper right-hand corner of the SELECT
ASSAYS FOR STAT screen.
NOTE: If the AEROSET System is configured for Host
Order Query, only the Sample ID is required. The assay
orders are sent from the Host system.
To Next Page
Loading...