Abbott Diagnostics Aeroset - Page 225

Calibration Review
AEROSET
®
Customer Training Guide 6-21
94858-103 — July 2003
ASSAY STATUS Screen
The Calibration Information portion of the ASSAY STATUS screen is
shown below.
Figure 6.7: Calibration Information Area of the ASSAY STATUS
Screen
• No intercept used since it always draws
a line through 0.
2. Absorbance Values
(C1 - C8 are corrected
for reagent blank)
3. Factor calculated
for each portion of
the curve
4. Calibrator
Concentration
8. Scrolls between
the current,
previous, and
stored calibration
curves
9. Select to view the
current calibration
curve
7. Date and time the calibration
was performed
6. Date and time the
calibration expires
5. Calibration Error
Code Display Area
1. Calibration
Graph