MODULE 8: CONFIGURATION
8-42 AEROSET
®
Customer Training Guide
94858-103 — July 2003
Rerun Rules Page
Figure 8.14: Assay Configuration Screen, Rerun Rules Page (Photometric
Assay)
For each Result Error Code that can be generated for a result, the
Operator can define a rerun option. The options are Same, Dil 1, and Dil
2. The Auto Rerun feature must be selected in the SYSTEM
CONFIGURATION screen to activate the options defined.
NOTE: Auto Rerun is performed only one time and is
performed as a routine assay. Auto Rerun is not performed in
STAT samples.
To Next Page
Loading...