Consumables and Accessories
AEROSET
®
Customer Training Guide 1-21
94858-103 — July 2003
ICT™ Sample Diluent
The ICT Sample Diluent is prepackaged in large bar coded reagent
cartridges and is placed in an outer segment of Reagent Supply Center
1. This diluent is used to dilute samples for ICT analysis.
Figure 1.12: ICT Sample Diluent
ICT Calibrators
The ICT Calibrators (7% bovine serum albumin base) and ICT Urine
Calibrators (aqueous base) are used to calibrate the ICT Module. Each
set contains two levels (Low and High). Unopened bottles are stored at
room temperature. Once opened, the bottles must be refrigerated. Refer
to the ICT Calibrator Package Inserts for additional information.
Figure 1.13: ICT Calibrators
• ICT™ Sample Diluent on board
stability is 14 days.
• Good 7 days after opening at 2-
8°C.
• Point out values on the box.
125627
To Next Page
Loading...