Multiple Skills Activity
AEROSET
®
Customer Training Guide 12-5
94858-103 — July 2003
7. Select <RUN> to display the RUN OPTIONS screen and make the
following selections:
a. Run the patient samples
b. Limit the run to analyze all assays except
Phosphorus
c. Run Start-QC for all assays
d. Run End-QC
8. Load the patient and QC samples, then initiate the run.
NOTE: Wait for the samples to begin sampling before
proceeding to the next step.
Adding a Sample in the Reserved STAT Position
1. Confirm that the STAT Sampling Indicator Light is not illuminated,
then place the sample in the Reserved STAT Position.
2. Order the following sample and initiate the run:
Adding Patient Samples During a Run
1. Add the following routine patient samples:
2. Load and initiate the run using the appropriate procedure for the
System status of your instrument.
SID Assays
8050 ICT, Glu, Ca
SID Name Assays
8046 Soar, Dinah Chem2
8048 Teak, Anne Chem2
8051 Sharalike, Sharon Chem2
To Next Page
Loading...