GLOSSARY
Glossary-4 AEROSET
®
Customer Training Guide
94858-103 — July 2003
Biohazard A situation where the Operator may be exposed to infectious materials or
substances.
Blank Correction A calibration type performed that uses reagent blank data only to adjust the
calibration curve.
B-Line Assay configuration that defines the reagent location as the inner segment (D)
of the Reagent Supply Center.
Button A screen operation that is selected for a specific action.
Calculated Absorbance The rate of change of absorbance calculated using the Linear Least Squares
method.
Calibration, Automatic A calibration that occurs automatically after a Reagent Cartridge change,
reagent lot change, or at the end of a calibration interval.
Calibration, Exponent A calibration mode for assays in which the absorbance or absorbance change
diverges as the concentration increases.
To Next Page