Laser Sources How to Use Laser Source Modules
106 Agilent 8163A/B, 8164A/B, and 8166A/B User’s Guide, Fourth Edition
NOTE For further information on modulating the optical output of a dual-
wavelength laser source module, see “How to Modulate Dual-
Wavelength Laser Source Modules” on page 109.
How to Enable/Disable Laser Output
To enable laser output using the user interface:
1 Move to [State] parameter and press Enter.
2 Move to [On], by using the cursor key, and press Enter. The green
LED on the module front panel switches on.
To disable laser output using the user interface:
1 Move to [State] parameter and press Enter.
2 Move to [Off], by using the cursor key, and press Enter. The green
LED on the module front panel switches off.
Figure 59 Dual-Wavelength Laser Source Outputs Both Wavelengths
To Next Page
Loading...
Need help?
General
