Applications Recording Measurement Results
268 Agilent 8163A/B, 8164A/B, and 8166A/B User’s Guide, Fourth Edition
Saving Application Measurement Results to
Diskette
If you are using the Agilent 8164A/B Lightwave Measurement System,
you can save application measurement results to diskette by
completing the following instructions:
1 Perform any of the following applications as described above:
– “The Logging Application” on page 225,
– “The Stability Application” on page 237, or
– “The PACT Application” on page 248.
2 Move to the Analysis Screen.
3 Insert a floppy disk in the diskette drive of your Agilent 8164A/B
Lightwave Measurement System.
4 Press [Menu].
5 Move to one of the following options:
–<Save Ascii File>, the data will be saved in Ascii-text format, that
can be opened by all text editors.
–<Save CSV File>, the data will be saved in CSV format, that can be
opened by Microsoft Excel.
6 Press Enter.The File Name Editor, as shown in Figure 175, appears.
Figure 175 The File Name Editor
To Next Page
Loading...
Need help?
General
