Additional Information Using the System Utilities
64 Agilent 8163A/B, 8164A/B, and 8166A/B User’s Guide, Fourth Edition
4 Use the left and right cursor keys to move to the day, month or year.
Edit the day, month or year using the cursor key. Press Enter.
5 Perform steps 3 to 4 again if the date is not fully correct.
6 Use the cursor key to move to the Time field. Press the [Edit]
softkey. The hour of the day is highlighted. The 24-hour clock is
used.
7 Use the left and right cursor keys to move to the hour, minute, or
second. Edit the hour, minute, or second using the cursor key. Press
[OK].
8 Perform steps 6 to 7 again if the date is not fully correct.
9 When the time and date are both correct, press [Close] to return to
the configuration menu.
How to Lock/Unlock the High-Power Laser
Sources
To unlock high-power laser sources (including Tunable Laser
modules):
1 Press the Config hardkey.
2 Move to the <Unlock> menu option and press Enter. You see a box
requesting you to enter the password.
Figure 30 Unlocking the Instrument
To Next Page
Loading...
Need help?
General
