The Logging Application Applications
Agilent 8163A/B, 8164A/B, and 8166A/B User’s Guide, Fourth Edition 235
Viewing the Statistics for a Power Meter Channel
25 If you are using the Agilent 8164A/B, move to [Stat Ch.], press
Enter, move to a Power Meter channel, and press Enter.
If you are using the Agilent 8163A/B, press [More], the screen in
Figure 152 appears, move to [Stat Ch.], press Enter, move to a
Power Meter channel, and press Enter.
Figure 152 The Agilent 8163B Logging Analysis Screen - Second Screen
26 The following statistics are displayed for the chosen Power Meter
channel:
–[min], the minimum power measurement measured,
–[max], the maximum power measurement measured,
–[avg], the average of all power measurements measured,
–[
∆P], the difference between [max] and [min],
–[dev], the standard deviation of all power measurements
measured.
On-Screen Messages
The messages listed in the table below may appear at the top of the
screen during the Logging application.
To Next Page
Loading...
Need help?
General
