Additional Information Using the System Utilities
62 Agilent 8163A/B, 8164A/B, and 8166A/B User’s Guide, Fourth Edition
You can move to any of the menu items by using the cursor key or the
Modify knob. Select an item by pressing Enter or the [OK] softkey.
How to Set the Backlight
The Backlight and menu option allows you to change the appearance
of the screen.
NOTE The Backlight menu option is supported by the Agilent 8163A/B and
Agilent 8166A/B but not by the Agilent 8164A/B.
To Set the Backlight
To change the backlight level of the Agilent 8163A/B/..6A/B’s screen:
1 Press the Config hardkey.
2 Move to the <Backlight> menu option and press Enter. You see a
box displaying the current setting.
Figure 28 Entering a Backlight Value
3 Enter an integer value between zero and one hundred in this box
and press Enter.
NOTE The Contrast can also be set for the Agilent 8163A and the 8166A
models, but only these models, as follows:
To Next Page
Loading...
Need help?
General
