Using the System Utilities Additional Information
Agilent 8163A/B, 8164A/B, and 8166A/B User’s Guide, Fourth Edition 63
1 Press the Config hardkey.
2 Move to the <Contrast> menu option and press Enter. You see a box
displaying the current setting
3 Enter an integer value between zero and one hundred in this box
and press Enter.
How to Set the Date & Time
The instrument uses the date and time when:
• you print out data from an application,
• you save data to diskette from an application, and
•you send the
:SYSTem:DATE?
or
:SYSTem:TIME?
GPIB commands, see
your instrument’s Programming Guide for more details.
To set the date and time:
1 Press the Config hardkey.
2 Move to the <Date & Time> menu option and press Enter. You see a
box, similar to Figure 29, displaying the current date and time
settings.
Figure 29 Editing the Date and the Time
3 Use the cursor key to move to the Date field. Press the [Edit]
softkey. The day of the month is highlighted.
To Next Page
Loading...
Need help?
General
