How to Change the Value of a Parameter Getting Started
Agilent 8163A/B, 8164A/B, and 8166A/B User’s Guide, Fourth Edition 55
How to Change a Discrete Parameter
For discrete parameters, you may choose a particular values within a
given range.
For a Power Sensor module:
1 Move to the Power Sensor channel and press the [Details] softkey.
2 Move to the [AvgTime] parameter and press Enter.
3 Move to 1 s, by using the cursor key, and press Enter.
or
1 Move to the Power Sensor channel and press the [Menu] softkey.
2 Move to the <Averaging Time> parameter and press Enter. You see
the screen in Figure 24.
3 Move to <1 s>, by using the cursor key, and press Enter.
How to Set All Parameters to Their Default
Values
Press Preset to set all parameters to their default values.
Figure 24 Averaging Time Menu
To Next Page
Loading...
Need help?
General
