Parallel Port, PCMCIA Slot, Keyboard connector and 24V DC Output Installation and Maintenance
Agilent 8163A/B, 8164A/B, and 8166A/B User’s Guide, Fourth Edition 295
Parallel Port, PCMCIA Slot,
Keyboard connector and 24V DC
Output
• These interfaces are present on all models. In addition the 8164A
Lightwave Measurement System has a PS/2 mouse connector.
• The parallel port is a standard centronics printer interface.
• The keyboard connector is a standard PS/2 connector.
NOTE The PCMCIA Slot, the keyboard slot and the 24V DC output are
reserved for future use.
Claims and Repackaging
If physical damage is evident or if the instrument does not meet
specification when received, notify the carrier and the nearest Agilent
Technologies Sales/Service Office. The Agilent Technologies
Sales/Service Office will arrange for repair or replacement of the unit
without waiting for settlement of the claim against the carrier.
Return Shipments to Agilent Technologies
If the instrument is to be shipped to a Agilent Technologies
Sales/Service Office, attach a tag showing owner, return address,
model number and full serial number and the type of service required.
The original shipping carton and packing material may be reusable,
but the Agilent Technologies Sales/Service Office will provide
information and recommendation on materials to be used if the
original packing is no longer available or reusable. General
instructions for repackaging are as follows:
• Wrap instrument in heavy paper or plastic.
• Use strong shipping container. A double wall carton made of 350-
pound test material is adequate.
To Next Page
Loading...
Need help?
General
