Recording Measurement Results Applications
Agilent 8163A/B, 8164A/B, and 8166A/B User’s Guide, Fourth Edition 265
Show Cal
To display the calibration parameters of the last calibration, press this
key.
Measure
Press this key to start a new Return Loss and/or Insertion Loss
measurement.
Menu
Press this key to access all parameters and functions that apply to the
Return Loss Application.
Recording Measurement Results
Printing Application Measurement Results
You can print application measurement results by completing the
following instructions.
1 Perform any of the following applications as described above:
– “The Logging Application” on page 225,
– “The Stability Application” on page 237, or
– “The PACT Application” on page 248.
2 Move to the Analysis Screen.
3 Connect your printer to the instrument as described in “How to
Connect a Printer” on page 76.
4 Select the printer type as described in “How to Select the Printer
Type” on page 70.
To Next Page
Loading...
Need help?
General
