Applications The Stability Application
238 Agilent 8163A/B, 8164A/B, and 8166A/B User’s Guide, Fourth Edition
The Stability application differs from “The Logging Application” on
page 225 because you may use auto-ranging mode, see step 9 on
page 240 for more information.
All results can be:
• displayed on the screen,
• printed out to hardcopy, or
• saved to disk drive of your Agilent 8164A/B Lightwave
Measurement System.
How to Set Up a Stability Function
To set up a stability function:
1 Press the Appl hardkey. The Applications menu, as shown in Figure
144, appears.
Move to <Stability> and press Enter. The Stability Setup Screen, as
shown in Figure 154, appears.
Figure 154 The Agilent 8164A/B Stability Setup Screen
To Next Page
Loading...
Need help?
General
