Agilent Technologies 8166B User Guide

Using the System Utilities Additional Information
Agilent 8163A/B, 8164A/B, and 8166A/B User’s Guide, Fourth Edition 73
4 The part number, serial number, and firmware revision of the
chosen module are displayed, as shown in Figure 38.
5 Press [Close] to return to the menu in Figure 37.
6 Perform steps 3 to 5 to view information about other module slots
or press [Close] to return to the configuration menu.
NOTE • The Agilent 81640A/42A/80A/82A/89A Tunable Laser modules will
always return HEWLETT-PACKARD as the manufacturer.
• All other Agilent 8163A/B Series modules return Agilent
Technologies as the manufacturer.
• The HP 8153A Series modules will always return HEWLETT-
PACKARD as the manufacturer.
See “How to Get Information About the Mainframe” on page 73 for
information on mainframe identity strings.
How to Get Information About the
Mainframe
To get information about the mainframe:
1 Press the Config hardkey.
Figure 38 Viewing Information About a Module

Agilent Technologies 8166B Specifications

General

Brand	Agilent Technologies
Model	8166B
Category	Measuring Instruments
Language	English