Error Messages Return Loss Meters
390 Agilent 8163A/B, 8164A/B, and 8166A/B User’s Guide, Fourth Edition
error message E10081: Safety comparator <a> test failed (b, c)
description Checks whether laser current safety comparator includes at the
right conditions a safety interrupt at the CPU
test value a laser number
b shows whether the interrupt flag was raised when the
current was lower than the limit
c shows whether the interrupt flag was raised when the
current was higher than the limit
action Please return the unit to your local service center for repair
To Next Page
Loading...
Need help?
General
