Agilent Technologies 8166B User Guide

Error Messages Optical Switch modules
406 Agilent 8163A/B, 8164A/B, and 8166A/B User’s Guide, Fourth Edition
error message KeySelftest() called without calling KeyInit() before
KeySelftest(): KeyDisable() failed
KeySelftest(): selftestPre() failed
KeySelftest(): key pressed during selftest or hardware problem
KeySelftest(): selftestPost() failed
KeySelftest(): KeyEnable() failed
KeySelftestExecPortF(): wrong interrupt number
KeySelftestPreTPU(): FreeTpultc() failed
KeySelftestExecTPU(): GetTpuDioState() failed
KeySelftestPostTPU(): AllocTpultc() failed
Selftest (stAll, 0) failed
description Selftest problem. Possible causes:
- hardware failure
- key pressed during selftest
- calibration data or firmware incorrect
test value
action Please return the unit to your local service center for repair
error message InitKey(): unsupported keyLocation
KeyAck(): unsupported keyLocation
KeyEnable(): unsupported keyLocation
KeyDisable(): unsupported keyLocation
KeySelftestPre(): unsupported keyLocation
KeySelftestExec(): unsupported keyLocation
KeySelftestPost(): unsupported keyLocation
description Calibtation data incorrect
test value
action Please return the unit to your local service center for repair
error message Preset (0) failed
Preset(): channel X, config Y failed
description Preset failed, probably due to incorrect calibration data
test value X module channel
Y switch configuration number
action Please return the unit to your local service center for repair
error message Error checking firmware CRC!
description The firmware CRC is wrong

Agilent Technologies 8166B Specifications

General

Brand	Agilent Technologies
Model	8166B
Category	Measuring Instruments
Language	English