4 Triggering
134 InfiniiVision Oscilloscopes User’s Guide
• The Bit Time softkey lets you select the bit time position.
• The 01X softkey lets you set the bit time position value as a 1, 0, or X (don't
care).
• Parity Error – triggers if the (odd) parity bit is incorrect for the data in the word.
• Manchester Error – triggers if a Manchester encoding error is detected.
• Sync Error – triggers if an invalid Sync pulse is found.
To display MIL-STD-1553 serial decode, see “MIL-STD 1553 Serial Decode” on page 320.
To Next Page
Loading...
