Initial Setup 2
InfiniiVision Oscilloscopes User’s Guide 57
To set the clock
The Clock Menu lets you set the current date and time of day (24-hour format). This
time/date stamp will appear on hardcopy prints and directory information on the USB
mass storage device.
To set the date and time, or to view the current date and time:
1 Press [Utility]&Options&Clock.
2 Press the Year, Month, Day, Hour or Minute softkey and rotate the Entry knob to set to
the desired number.
The hours are shown in the 24-hour format. So 1:00 PM is hour 13.
The real-time clock only allows selection of valid dates. If a day is selected and the month
or year is changed so the day is invalid, the day is automatically adjusted.
Year set Month set Return to
previous menu
Day set Hour set Minute set
To Next Page
Loading...
Need help?
General
