EasyManua.ls Logo

Agilent Technologies InfiniiVision 5000 Series - Environmental Conditions

Agilent Technologies InfiniiVision 5000 Series
428 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Reference 15
InfiniiVision Oscilloscopes User’s Guide 405
Environmental Conditions
Environment Indoor use only.
Ambient temperature Operating –10 °C to +55 °C;
non-operating –40 °C to +70 °C
Humidity Operating 95% RH at 40 °C for 24 hr; non-operating 90% RH at 65 °C for 24 hr
Altitude Operating to 4,570 m (15,000 ft); non-operating to 15,244 m (50,000 ft)
Overvoltage Category This product is intended to be powered by MAINS that comply
to Overvoltage Category II, which is typical of cord-and-plug connected equipment.
Pollution Degree The InfiniiVision scilloscopes may be operated in environments of
Pollution Degree 2 (or Pollution Degree 1).
Pollution Degree Definitions Pollution Degree 1: No pollution or only dry,
non-conductive pollution occurs. The pollution has no influence. Example: A clean room
or climate controlled office environment.
Pollution Degree 2. Normally only dry non-conductive pollution occurs. Occasionally a
temporary conductivity caused by condensation may occur. Example: General indoor
environment.
Pollution Degree 3: Conductive pollution occurs, or dry, non-conductive pollution occurs
which becomes conductive due to condensation which is expected. Example: Sheltered
outdoor environment.

Table of Contents

Other manuals for Agilent Technologies InfiniiVision 5000 Series

Related product manuals