Agilent Technologies InfiniiVision 5000 Series User Manual

6 Measurements and Math Functions
234 InfiniiVision Oscilloscopes User’s Guide
Square Root
Square root () calculates the square root of the selected source.
1 Press the [Math] key, press the press the Function softkey and select f(t), press the
Operator softkey and select  (square root). Press the Source 1, Scale, or Offset
sofkeys if you want to change the source, scaling, or offset for the square root
function.
• Source 1 — selects the source for  (square root). (See page 225 for information
about using g(t) as the source.)
• Scale — lets you set your own vertical scale factors for  (square root) expressed
as V
1/2
/div (Volts-square-root/division), A
1/2
/div (Amps-square-root/division), or
W
1/2
/div (Watts-square-root/division or Volt-Amps-square-root/division). Units
are set in the channel Probe Menu. Press the Scale softkey, then turn the Entry
knob to rescale  (square root).
• Offset — lets you set your own offset for the multiply math function. The offset
value is in V
1/2
(Volts-square-root), A
1/2
(Amps-square-root), or W
1/2
(Watts-square-root) and is represented by the center horizontal grid line of the
display. Press the Offset softkey, then turn the Entry knob to change the offset for 
(square root).
A scale unit of U (undefined) will be displayed for scale and offset if the two source
channels are set to dissimilar units. Units are set using the channel’s Probe Units
softkey.

Agilent Technologies InfiniiVision 5000 Series Specifications

General

Brand	Agilent Technologies
Model	InfiniiVision 5000 Series
Category	Test Equipment
Language	English